ABSOLUTE Digimatic Caliper 500 Series
Attribute:
ABSOLUTE Digimatic Caliper 500 Series — with exclusive ABSOLUTE Encoder Technology
Choose
Categories : Small Tools , Vernier Calipers ,
Calipers
An industry standard in measuring tools
ABSOLUTE Digimatic Caliper 500 Series — with exclusive ABSOLUTE Encoder Technology
• ABSOLUTE electromagnetic induction linear encoder system is introduced (except for 0 - 300mm/0 - 12" models).
• New ergonomic design with fnger rest.
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale for comparison measurements. This button will also allow return to the absolute (ABS) mode and display of the true position from the origin (usually jaws closed point).
• Large and clear LCD readout.
• Smooth slider movement makes for comfortable operation.
• 18,000 hours battery life.
• Allows step measurement.
• Carbide-tipped jaw calipers are optimal for rough fnished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector.
Technical Data
Accuracy: ±0.02mm (≤200mm), ±0.03mm (≤300mm) (excluding quantizing error)
Resolution: 0.01mm or .0005"/0.01mm
Repeatability: 0.01mm
Display: LCD
Scale type*:ABSOLUTE electromagnetic induction linear encoder
*ABSOLUTE electrostatic capacity static linear encoder for 0 - 300mm/0 - 12" models.
Max. response speed: Unlimited
Battery: SR44 (1 pc), 938882, for initial operational checks (standard accessory)
Battery life: Approx. 5 years under normal use (18,000 hours for continuous use)
Functions
Absolute measurement: After power is turned ON, measurement can be started without zero-setting if origin-setting was previously performed. The Absolute origin position can be changed by the ORIGIN button.
Incremental measurement: Display can be set to zero at any arbitrary position for comparative measurements
Low-voltage alert: If the battery voltage becomes low, a “B” appears in the display to alert the user before measurement is no longer possible. A battery change advisory alert precedes this alert.
Data output: By using the connecting cable (option), measurement data can be output.
Data hold: By using the data hold unit (option), the displayed value can be held. This cannot be used with the data output function.
Metric
| Order No. | Range | Accuracy** | Mass | Depth bar | Fine adjust ment | Remarks |
| 500-150-30 | 0 - 100mm | ±0.02mm | 137 | ø1.9mm rod | with thumb roller | — |
| 500-180-30* | — | |||||
| 500-151-30 | 0 - 150mm | 162 | Blade | with thumb roller | ||
| 500-154-30 | Carbide-tipped jaws for outside measurement | |||||
| 500-155-30 | Carbide-tipped jaws for outside and inside measurement | |||||
| 500-158-30 | ø1.9mm rod | — | ||||
| 500-181-30* | Blade | — | ||||
| 500-152-30 | 0 - 200mm | 192 | with thumb roller | |||
| 500-156-30 | Carbide-tipped jaws for outside measurement | |||||
| 500-157-30 | Carbide-tipped jaws for outside and inside measurement | |||||
| 500-182-30* | — | — | ||||
| 500-153 | 0 - 300mm | ±0.03mm | 350 | with thumb roller |
* Without SPC data output
* Not including quantizing error of ±1 count in LSD
Inch/Metric
| Order No. | Range | Accuracy** | Mass | Depth bar | Fine adjustment | Remarks |
| 500-170-30 | 0 - 4" | ±.001"/ ±0.02mm | 137 | .075" rod | with thumb roller | — |
| 500-195-30* | ||||||
| 500-171-30 | 0 - 6" | 162 | Blade | |||
| 500-174-30 | Carbide-tipped jaws for outside measurement | |||||
| 500-175-30 | Carbide-tipped jaws for outside and inside measurement | |||||
| 500-178-30 | .075" rod | — | ||||
| 500-196-30* | Blade | |||||
| 500-159-30* | Carbide-tipped jaws for outside measurement | |||||
| 500-160-30* | Carbide-tipped jaws for outside and inside measurement | |||||
| 500-172-30 | 0 - 8" | 192 | — | |||
| 500-176-30 | Carbide-tipped jaws for outside measurement | |||||
| 500-177-30 | Carbide-tipped jaws for outside and inside measurement | |||||
| 500-197-30* | — | |||||
| 500-163-30* | Carbide-tipped jaws for outside measurement | |||||
| 500-164-30* | Carbide-tipped jaws for outside and inside measurement | |||||
| 500-173 | 0 - 12" | ±.0015"/ ±0.03mm | 350 | — | ||
| 500-167 | Carbide-tipped jaws for outside measurement | |||||
| 500-168 | Carbide-tipped jaws for outside and inside measurement | |||||
| 500-193* | — | |||||
| 500-165* | — | Carbide-tipped jaws for outside measurement | ||||
| 500-166* | Carbide-tipped jaws for outside and inside measurement |
* Without SPC data output
* Not including quantizing error of ±1 count in LSD
![Vernier Caliper 0.05 mm[Series 530]](https://image.makewebcdn.com/makeweb/r_409x409/1rNJSVrNd/Products/14.jpg?v=202405291424 "Vernier Caliper 0.05 mm[Series 530]")
