Micrometer Inspection Gauge Block Sets SERIES 516 - MITUTOYO
Attribute:
Micrometer Inspection Gauge Block Sets SERIES 516
Categories : Small Tools , Gauges Blocks ,
Gauge Blocks (เกจบล็อค)
Length Standards Brought to You by Mitutoyo
Micrometer Inspection Gauge Block Sets SERIES 516
• Dedicated gauge block sets for micrometer inspection.
Sets 516-106/7/8 and 516-322/3 are recommended for checking instrumental errors in
micrometers due to the choice of block sizes ensuring that the instrument is checked through a full
rotation of the spindle over the range 0-25 mm (or 0-1 inch).
Sets 516-115/6/7, 516-165/6 and 516-177 contain blocks in 25 mm (or 1 inch) steps for aiding
inspection of large micrometers in conjunction with one of the abovementioned sets.
Sets 516-580/1/2, 516-390/1/2 are dedicated to the QuantuMike with its 2 mm/rev spindle feed.
STEEL AND CERA
SPECIFICATIONS
Metric Micro Checker (holder only)
| Order No. | 516-607 |
| Applicable gauge block sets | 516-106/107/108, 516-156/157/158 |
| Applicable gauge block sizes (mm) | 2.5, 5.1, 7.7, 10.3, 12.9, 15, 17.6, 20.2, 22.8, 25 |
Inch Micro Checker (holder only)
| Order No. | 516-608 |
| Applicable gauge block sets | 516-921/922/923, 516-321/322/323 |
| Applicable gauge block sizes (inch) | 0.105, 0.210, 0.315, 0.420, 0.5, 0.605, 0.710, 0.815, 0.920, 1 |
SPECIFICATIONS
Metric Block Sets
| Blocks per set | Order No. | Standard/grade available and Suffx No.* | Blocks included in set | |||
| Steel | CERA | ISO/DIN/JIS | ASME | BS | ||
| 16 | 516-111 516-112 516-113 | 516-161 516-162 516-163 | 0:-∎0 1:-∎0 2:-∎0 | — — — | — — — | 1.00, 1.25, 1.5, 2, 3, 5, 10, 15, 20, 25, 25.25, 30, 35, 40, 45, 50 mm, Cerastone, Optical parallels (t = 12 mm, 25 mm) |
| 10 | 516-977 516-978 516-979 516-980 | — 516-378 516-379 516-380 | K:-∎0 0:-∎0 1:-∎0 2:-∎0 | — — — — | — — — — | 1.00, 1.25, 1.50, 2, 3, 5, 10, 15, 20, 25 mm, Optical parallel (t = 12 mm) |
| 10 | 516-103 516-101 — | 516-152 516-153 516-154 | 0:-∎0 1:-∎0 2:-∎0 | 0:-∎6 1:-∎6 — | — — — | 1.00, 1.25, 1.50, 2, 3, 5, 10, 15, 20, 25 mm |
| 10 | 516-580 516-581 516-582 | 516-390 516-391 516-392 | 0:-∎0 1:-∎0 2:-∎0 | — — — | — — — | 2.2, 4.8, 7.8, 10.4, 12, 15.2, 17.4, 19.6, 22.6, 25 mm |
| 10 | 516-106 516-107 516-108 | 516-156 516-157 516-158 | 0:-∎0 1:-∎0 2:-∎0 | — — — | — — — | 2.5, 5.1, 7.7, 10.3, 12.9, 15, 17.6, 20.2, 22.8, 25 mm, Optical parallel (t = 12 mm) |
| 10 | 516-132 516-133 516-134 | 516-182 516-183 516-184 | 0:-∎0 1:-∎0 2:-∎0 | — — — | — — — | 1.25, 1.50, 1, 2, 3, 5, 10, 15, 20, 25 mm, Micro Checker, Optical parallel (t = 12 mm) |
| 10 | 516-135 516-136 516-137 | 516-185 516-186 516-187 | 0:-∎0 1:-∎0 2:-∎0 | — — — | — — — | 2.5, 5.1, 7.7, 10.3, 12.9, 15, 17.6, 20.2, 22.8, 25 mm, Micro Checker, Optical parallel (t = 12 mm) |
| 8 | — — 516-115 516-116 516-117 | 516-547 516-164 516-165 516-166 516-167 | — K:-∎0 0:-∎0 1:-∎0 2:-∎0 | K:-∎6 00:-∎6 0:-∎6 1:-∎6 2:-∎6 | — — — — — | 25, 50, 75, 100, 125, 150, 175, 200 mm |
Inch ฺBlock Sets
| Blocks per set | Order No. | Standard/grade available and Suffx No.* | Blocks included in set | |||
| Steel | CERA | ISO/DIN/JIS | ASME | BS | ||
| 10 | 516-528 516-529 516-530 | 516-318 516-319 516-320 | — — — | 00:-∎6 0:-∎6 1:-∎6 | 0:-∎1 1:-∎1 2:-∎1 | 0.087, 0.189, 0.307, 0.409, 0.472, 0.598, 0.669, 0.772, 0.890, 1 in |
| 10 | 516-552 516-921 516-922 516-923 | 516-559 516-321 516-322 516-323 | — — — — | K:-∎6 00:-∎6 0:-∎6 1:-∎6 | — 0:-∎1 1:-∎1 2:-∎1 | 0.105, 0.210, 0.315, 0.420, 0.500, 0.605, 0.710, 0.815, 0.920, 1 in, Optical parallel (t = 0.5 in) |
| 10 | 516-553 516-138 516-139 516-140 | 516-560 516-188 516-189 516-190 | — — — — | K:-∎6 00:-∎6 0:-∎6 1:-∎6 | — 0:-∎1 1:-∎1 2:-∎1 | 0.105, 0.210, 0.315, 0.420, 0.500, 0.605, 0.710, 0.815, 0.920, 1 in, Micro checker, Optical parallel (t = 0.5 in) |
| 9 | 516-554 516-929 516-930 516-931 516-932 | 516-561 516-333 516-334 516-335 516-336 | — — — — — | K:-∎6 | — — — — — | 0.0625, 0.100, 0.125, 0.200, 0.250, 0.300, 0.500, 1, 2 in, Optical parallel (t = 0.5 in) |
| 9 | 516-555 516-141 516-142 516-143 516-144 | 516-562 516-191 516-192 516-193 516-194 | — — — — — | K:-∎6 00:-∎6 0:-∎6 1:-∎6 2:-∎6 | — — — — — | 0.0625, 0.100, 0.125, 0.200, 0.250, 0.300, 0.500, 1, 2 in, Micro Checker, Optical parallel (t = 0.5 in) |
| 9 | — — 516-934 516-935 516-936 | 516-563 516-329 516-330 516-331 516-332 | — — — — — | K:-∎6 00:-∎6 0:-∎6 1:-∎6 2:-∎6 | — — — — — | 0.0625, 0.100, 0.125, 0.200, 0.250, 0.300, 0.500, 1, 2 in |
| 8 | 516-126 516-127 | 516-176 516-177 | — — | 0:-∎6 1:-∎6 | — — | 1, 2, 3, 4, 5, 6, 7, 8 in |
SERIES 516 – Caliper Inspection Gauge Block Sets
SPECIFICATIONS
Metric Block Sets
| Blocks per set | Order No. | Standard/grade available and Suffx No.* | Blocks included in set | |||
| Steel | CERA | ISO/DIN/JIS | ASME | BS | ||
| 5 | — — | — 516-174 | — 2:-10 | — — | — — | 5 pcs.: 10.3, 24.5, 50, 75, 100 mm, Ceramic plain jaws, Holder (250 mm), Glove |
| 4 | 516-526 516-527 | 516-566 516-567 | 1: -10 2: -10 | — — | — — | 4 pcs.: 10, 30, 50, 125 mm, Setting ring (ø4 mm, ø10 mm), Pin gage (ø10 mm), Glove |
| 3 | 516-124 516-125 | 516-150 516-151 | 1: -10 2: -10 | — — | — — | 3 pcs.: 30, 41.3, 131.4 mm, Setting ring (ø4 mm, ø25 mm), Glove |
| 2 | 516-122 516-123 | 516-172 516-173 | 1: -10 2: -10 | — — | — — | 2 pcs.: 41.3, 131.4 mm, Setting ring (ø20 mm), Glove |
* Suffx Number ( n ) for Selecting Standard and Certifcate Provided
ISO/DIN/JIS
| Suffx No. | Inspection Certifcate | Calibration Certifcate |
| JCSS | ||
| 1 | ✔ | — |
| 6 | ✔ | ✔ |
ASME
| Suffx No. | Inspection Certifcate | Calibration Certifcate |
| JCSS | ||
| 1 | ✔ | — |
| 6 | ✔ | ✔ |
Suffx No. 6: Only for Grade K sets.
BS
| Suffx No. | Inspection Certifcate | Calibration Certifcate |
| JCSS | ||
| 1 | ✔ | — |
![Gauge Blocks 103 pcs. [Series 516]](https://image.makewebcdn.com/makeweb/r_409x409/1rNJSVrNd/Products/129.png?v=202405291424 "Gauge Blocks 103 pcs. [Series 516]")
![Gauge Blocks 87 pcs. [Series 516]](https://image.makewebcdn.com/makeweb/r_409x409/1rNJSVrNd/Products/132.png?v=202405291424 "Gauge Blocks 87 pcs. [Series 516]")
